DAVID SLS-2 Especificações descarregar pdf (Página 5)

Figure 2.1: Left: Small object Z short distances; Right: Large object Z greater distances

Figure 2.2: Setting the camera angle

2. Initial Setup

2.1. Position of the Camera

The camera can be mounted on the right or left side of the projector:

If necessary, mount the camera slide to the corresponding side. The exact position of the slide (distance

from the projector) is set later in operation. The distance between the camera and projector optics will

be similar to the size of the object/region to be scanned.

2.2. Rotation of the Camera

Rotate the camera by about 22° such that

it aims at the projection area. (Fig. 2.2)

To do this, loosen the thumbscrew under

the camera. Set the rotation angle by

means of the degree scale on the camera

slide, then ﬁx the thumbscrew.

Size of the scan object /

scan area

up to 110 mm

110 to 350 mm

from 350 mm

Position of the Camera

(seen from rear)

to the left of the projector

optional, better to the left

to the right of the projector

1 2 3 4 5 6 7 8 9 10 ... 25 26

Sem comentários

DAVID SLS-2 Especificações Página 5